An inertial-magnetic system.

This inertial-magnetic system, if synchronized, would experience vibrations in two directions: forward - backward or up - down. However, the use of a copper or aluminum or silver pipe would allow for the creation of a predominance of a force directed forward or upward. The inertial force resulting from the fact of the rotation of the solid body in a circle would be joined by the magnetic force generated during the passage of the magnet - the cart through the center of this copper pipe. During the passage of a strong permanent magnet in the pipe, the electrons from the copper pipe are pushed upwards but have no way to escape, so they interfere with the magnetic field from the neodymium magnet and cause its passage through itself to slow down. When the magnet leaves the pipe, the pipe will try to follow the magnet due to the existence of free electrons in the pipe, this effect will cause one side of the device to rise, which will also occur on the other side because the system is duplicated, and it would be best if it consisted of three such generators. The problem is the intense vibrations into which the system will fall. However, it is assumed that at high speeds the system will behave more stably, and the force from the magnetic carriage passing through the copper pipe will be crucial to the operation of the device, which should lose weight as the device's speed increases. For better operation of the device, the generators should be tilted 23 degrees from the vertical with the upper pole of the axis pointing outwards. In this way, the device would gain stability if it were to be located above the level of the starting plane. The system could also be powered by compressed air from a compressor, rather than using electromagnets, but here I used electromagnets, but the use of compressed air would be an even better solution for several reasons, but it would require the use of a slightly different construction of the channels in which the carriages rotate. Maybe someone was trying such a system earlier, if so, tell me whether this system works or not. I haven't test it yet due to lack of skill and money.

It is not new that I am still trying to find new ways of space transport so I am posting such a content often in hope that someone has similar experiences in technology and is willing to share his results. It would be nice to have proper quantity of money for make such a propulsion types real but for now too many hands in my pocket are preventing me from obtaining a success.