Centrifugal force inertial electricity magnetic generator.

Centrifugal force can be useful for generating electricity. Here is centrifugal force harnessing electric and permanent magnets generator for obtaining electricity by use of coils (color orange) and magnets (color red and blue). The coils will be gathering and sending electric current due to magnetic field displacement inside them. When the rotor is rotating in one direction, each of three weights which have an ability to move slightly outward will be pushing on each ball bearings which is mounted on the top of coil and magnets with spring systems pushing by a centrifugal force. The gaps between rotor's three arm are allowing the magnets to return to their primary positions, so electric energy is generated in two situations: when the ball bearings are pushed into the holes created by use of toroidal coils and when the springs are released because of canceling of force coming from the weights of the three rotor system. Each weight is rounded a little more for allowing the front of the weight enter on the ball bearings. System can rotate in one direction for that reason. The most centrally located part of rotor in color green on the picture is connected to the shaft of the electric motor. The electric motor is powered by the same energy which is created in this generator, because the coils are connected in parallel. The faster the rotor is rotating more energy should be generated. The permanent magnets are polarized all the same with respect to the center of the device the south poles to the outside and north poles oriented to the center, however they can be polarized also oppositely.