Magnetic and inertial machine type 2

I have imagined a magnetic machine based on magnetic repulsion of permanent magnets and heavy flywheel. This is reciprocating machine with a simple mechanism. When the upper permanent magnet is approaching to the magnets mounted in the flywheel in vertical plane, it is polarized on repulsion and it makes the wheel to move in one side because the wheel is synchronized with a little displacement according to the axis of both magnets to the position of flywheel magnets so the movement is performed only in one direction as the wheel is turning. When the magnets are close, they will repel themselves and when the magnets are far away from each other the system is running inertially. The faster the wheel is turning the faster the reciprocating movement is performed thanks to ex-centered movement of centrally located shaft with smaller double flywheel. All is placed on ball bearings. The pistons in upper side of the device are moving along upper cylinders up and down as the wheel is rotating forcing them to that reaction by use of connecting rods. The energy obtained from only permanent magnets is transmitted to external receivers by use of gears and chains. It could be generators for obtaining electricity. Bellow pictures are only for showing the operation principle and are not executive drawings.