Centrifugal force could act against gravity force in specific situation in planetary conditions. Gravity is static force but when someone want to make work against it for instance in the aim of lift something off the ground, usually there must be dynamic mechanical force applied. The problem is that when we try to lift something of the ground in gravity we are also standing on that ground and the weight of that material object which we trying to move is now transmitting its weight by our feet on the same ground. Acting in the form of rocket or jet /propeller propulsion is not always good in every conditions due to limited abilities of those kinds of propulsion especially in space conditions. Gravity centrifugal force propulsion is harnessing the same origin acting force as gravity force available in the nature. Centrifugal force is inertial force, that can sustain lacking force needed in space transport. Centrifugal force is related to mass of the material object. Rotating mass generates centrifugal force and that force can be used as lifting force for spaceship which is in gravity or outside it. When it is in gravity force it can generate opposite force to overcome gravity and weight of a object. When it is in space it can generate acceleration force for propulsion of the spaceship. Generators needed to obtain that kind of propulsion should be equipped in at least three heavy steel balls rotating in the same synchronized phases and three containers with inclined slightly walls. When the balls are rotating they will be transmitting their inertial forces on the upper side of the container by magnetic or mechanic interactions. The balls can suck magnetically or push magnetically the surface at which the magnets are mounted. The ball is cover with permanent magnets mounted on its surface in the way the magnetic poles are always oriented the same pole to the outside and the ball is covered plastic or other material for obtaining smooth magnetic surface. The walls of containers should be made from non-magnetic material, but upper side of the container should be mage from permanent magnets with the same polarization to external ball polarization, so the surface should repel each other during movement. The magnetic surface of ball and upper container wall should be made from strong magnets like neodymium magnets. The powering for the system should be made from magnetic coils hidden inside bottom surface which distance from the ball shouldn’t be big. The magnetic force acting on ball should be dynamically changed, probably bottom surface should be able to create vortex field by use of several coils turned on one after another in closed loop. The magnetic field of ball is always non polarized on the surface only polarized on inside outside direction, so it looks like one-pole magnetic field. When balls are circulating from the inside of containers, they should be lifted slightly upward due to inclination of the containers walls, because the upper diameter of the container is bigger than the lower diameter of the container, so the balls will be turning on inside surface propelled by magnetic field from propulsive coils and each time they will be making an circle they will be climbing a little upward, when they will encounter upper magnetic surface polarized on repulsion they will be transmitting their inertial energy on this magnetic surfaces, because they all the time will be attached by centrifugal force to the external container’s walls which will be by use of its inclination trying to send the ball upper and upper, but magnetic field will be the obstacle in this process, so inertial energy of the rotating balls will be the cause of propulsion of the spaceship. The force coming from the rotation will become external lifting force for entire system. For better operation of the system there should be at least six generators of that kind. The magnetic balls with inside/outside polarization could be hard to construct due to magnetic field of part magnets will be repel each magnets due to they have the same particular polarization, so they should be mounted firmly to the surface of the ball, this is however not main problem in this case. The main problem can occur for the solution connected with the propulsive coils which should generate proper polarization for the ball but I think that this is possible to solve. This should work in this manner that coils should generate the same aimed rotating magnetic field perhaps polarized on attraction for the better effect, not on repulsion which could be less effective in action. I think that the entire height of the container shouldn’t be much bigger than the diameter of the ball only that big to obtain freely move of the ball inside the container. This solution is better due to the strength of propulsive magnetic force coming from he propulsive coils, the smaller gap the bigger force acting on the ball on each turn of the ball, so the end effort of the external energy will be smaller and the system can be more efficient energetically.
