wtorek, 24 czerwca 2025

Simple magnetically controlled inertial propulsion device.

A drawing showing magnetically controlled inertial system for propulsion with application of two independent weights. System can to work both on magnetic repulsion and attraction with relation to the side of device in vertical plane. The main shaft is sliding in slightly larger pipe which is conjoined with cross - shaft which is connected to external holder - ring on ball bearings. Simultaneously both electromagnets are powered by external source of current, so they working on repulsion or attraction in pairs - two are in rotating weights and two are joined with larger lubricated pipe. During one pair of electromagnet are working on repulsion another is working on attraction, so the magnetic impulse is every time strong allowing for fast rotating and compensating strong centrifugal forces. The rotating weights are partially hollow inside where part of central shaft can hide deeper or shallower. Every of electromagnets have holes inside in which the main shaft can reciprocate. Entire system is powered by electric motor mounted to cross - shaft from one of the sides.









An inertial-magnetic system.

This inertial-magnetic system, if synchronized, would experience vibrations in two directions: forward - backward or up - down. However, the use of a copper or aluminum or silver pipe would allow for the creation of a predominance of a force directed forward or upward. The inertial force resulting from the fact of the rotation of the solid body in a circle would be joined by the magnetic force generated during the passage of the magnet - the cart through the center of this copper pipe. During the passage of a strong permanent magnet in the pipe, the electrons from the copper pipe are pushed upwards but have no way to escape, so they interfere with the magnetic field from the neodymium magnet and cause its passage through itself to slow down. When the magnet leaves the pipe, the pipe will try to follow the magnet due to the existence of free electrons in the pipe, this effect will cause one side of the device to rise, which will also occur on the other side because the system is duplicated, and it would be best if it consisted of three such generators. The problem is the intense vibrations into which the system will fall. However, it is assumed that at high speeds the system will behave more stably, and the force from the magnetic carriage passing through the copper pipe will be crucial to the operation of the device, which should lose weight as the device's speed increases. For better operation of the device, the generators should be tilted 23 degrees from the vertical with the upper pole of the axis pointing outwards. In this way, the device would gain stability if it were to be located above the level of the starting plane. The system could also be powered by compressed air from a compressor, rather than using electromagnets, but here I used electromagnets, but the use of compressed air would be an even better solution for several reasons, but it would require the use of a slightly different construction of the channels in which the carriages rotate. Maybe someone was trying such a system earlier, if so, tell me whether this system works or not. I haven't test it yet due to lack of skill and money.




It is not new that I am still trying to find new ways of space transport so I am posting such a content often in hope that someone has similar experiences in technology and is willing to share his results. It would be nice to have proper quantity of money for make such a propulsion types real but for now too many hands in my pocket are preventing me from obtaining a success.



niedziela, 22 czerwca 2025

Fuel shortage or the other technology.

The important thing in today world is clean energy obtaining from non-chemical ways. The problem is generating great quantity of electric energy which can be converted to other kinds of energy like heat or light with process different from burning in oxygen or other chemical exothermic reaction processes. There is a need to invent a form of energy not based on nuclear fission or fusion, what not always can be connected with high energetical processes like in nuclear technology. 



Energy can be produced continuously in small portions suitable for one home energy requirements but in infinite term of time. The existence of country electric grid is doubtful in this approach, and the spread systems seems to be the right solution for many reasons. We can produce electric energy from sun, wind, or tide but those are environmental energies we cannot trust for hundred percent sureness especially when we need to generate it on other planets where there is no suitable atmosphere or in outer space far away from the light of stars. We need fuel-less and more versatile energy sources, safer in usage. Although the beginning of the civilization was formed on burning wood and coal, where those materials were needed to powering the steam machines during technical revolution in eighteen and nineteen century, the main human requirements according to the energy generating weren’t fulfilled in those times and they aren’t fulfilled now. The main limit of steam engines was exhaust gases and smokes as well as low efficiency of transforming obtained energy. The important and crucial civilization leap was made when humanity started to use electricity based solutions, invention of electricity was a milestone in human history, even if electric motors were neglected in preliminary stage in those days, the electricity was required for internal combustion engines, where it was needed for initiate the ignition processes. People started to gain the opportunity to learn after sunset when first lightbulb was invented without need to apply oil lamps which light was too weak for reading, and children were losing sight in this faint light. Now as a inhabitants of this planet we are strongly accustomed to all these improvements like clean water in our taps, light from led lamps, warm from central heating based on heat pump or gas stoves , etc. However, the supply system that is responsible for all these comfortable for us things is not safe. Humanity has nuclear plants, that needs cooling from sees, lakes or rivers, we are dependent from electric grids and if the grids would be destructed we couldn’t find any solution for this disaster. Despite of this, humanity has invented mobile energy generators based on internal combustion engines that needs a lot of fuel for work. The fact, that civilization is so dependent on fuels is catastrophic, if one would think about all danger implicating from this situation. But all predictions would be not plausible if someone would be trying to think that the fuel resources on the planet will be endless, that we’ll be able to produce it from carbon dioxide and water from the atmosphere of our planet, preliminarily emitted to it by ourselves, or something like this. Carbon dioxide is a waste exhaust gas with which none of wise people have no idea what to do, in vain is pumping it into underground carbon dioxide reservoirs. Humanity should face the fact that we are living on the edge. Someone really wasn't done his best about it. Humanity is not free, we are not living in freedom, for many reasons and the one them is the fact, that it is energetically dependent. Freedom is for that people who are now on the top of the world. For instance for the energy producents which are ultimate dictators in the process of life on this world. To be honest, this civilization hasn’t even a faint idea about its own cosmic neighborhood, faint recognition what is happening in nearness of own planet due to lack of seriously advanced space propulsion, this system is conservated by still the same institutions and economic processes. If this situation is to turn for better, the approach of technology dictators must be changed by people which are acting outside this deal, but it is rather obvious that the dictators won’t change their technology course due to their own economic environment that is for them a source of serious income. Besides the situation of global invalid processes that lead us to the edge of serious trouble is no only based on their activity, because this process was implemented through many years and at the beginning it has its own disadvantages which today start to bring many problems. Some strategies were wrong from the beginning, and although some inventors was trying to implement certain improvements, they were muted by system’s people and their harmful activity what is visible today on the global scale. Those who are so proud for the rocket propulsion, advanced electronics and latest progress in artificial intelligence systems, will not be so proud when the fuel for rockets or current for computers will be lacking for certain simple and easy to recognize reasons. Without any progress in technology of producing electricity or in propulsion for vehicles we won’t be able to go farther than the orbit and nearness of our own planet and even the colonization of nearest planets in solar system would be very difficult. For sure with only jet and rockets propulsion we can’t escape using crew expeditions outside solar system, and we won’t be able to colonize Mars in this century, and I don’t talk here about sporadic crew landing on Mars surface, what can take place in this century but we will not be able to fund there any larger system of facilities or habitats for sustain people living in good conditions. Building a city on Mars in this century is a fairytale with application of rocket propulsion. Other words, we cannot operate freely in space using only rocket systems. It is dramatic situation, that for exploration of space there is lost so much financial resources, only for sustain current not healthy situation in transport in outer space. Before we started space exploration by use of rockets, one should count advantages and disadvantages, maybe better situation would occur when we would be improve the system of propulsion we will be apply, before we start sending loads ad crews in space in rockets deck. First we should work out the technology of propulsion that would be adequate for cosmos dimensions before we start to do anything. 


 Humanity can’t improve rocket propulsion to nuclear rocket propulsion because of dangerous fission wastes produced in the process of nuclear propulsion, such systems are instable because they need high-enriched uranium or plutonium for operation. Much safer is looking for less risky methods of propulsion like reaction-less propulsion types. Although such propulsions are for now in preliminary stage of theoretical works or there are existing already certain types of prototypes which are working with low efficiency with some exceptions based on work of certain inventors which were more successful on that field but they were not noticed by proper institutions or influential people with premeditation or not as a promising people with vision, still some inventors don’t want to publish their revolutionary works to wider society for many reasons. 

czwartek, 19 czerwca 2025

Gravity and geomagnetic field propulsion

What if to spin those gyroscopes by use of those electric motors? However, there must be a kind of support underneath that central holder for both arms to prevent falling this system on the bottom. Even if someone would be trying to apply toroidal electromagnet inside this holder which would be generating magnetic field interacting with this centrally located permanent magnet, system would be still tending to fall in planetary gravity although the weight of the system is in pro-gravity state generated by those gyroscopes. The device will not be able to generate lift and it need fulcrum point, and through this fulcrum point still the rest of force generated by gravity will be transmitted by the central magnetic core to the ground. The other situation will be created when the strong magnetic field on the deck of the vehicle would be interacting with Earth's geomagnetic field, but if this situation the strength of magnetic field generated by vehicle should be measured in hundreds or even thousands of Teslas.  I assume, that only a fraction of needed magnetic field interaction on the deck with geomagnetic field will do in the situation of created pro-gravity state where most of the mass of the vehicle would be accumulated in the gyroscopes, so the vehicle would be needing only part of that energy which is required to lift the vehicle if only vehicle would working without rotating gyroscopes and acting would be relying only on magnetic interactions.



The electromagnet generating external magnetic field for the vehicle should be oriented properly to external magnetic field of the planets or galaxies to create repulsion with this field in relation to planets surfaces. The quantity of energy needed for lift the vehicle should be minimal if the weight of staying in rest mass would be negligently small and for instance 90 percent of mass would be rotating in gyroscopes. Electric field is also sensitive on magnetic field so if to accumulate one kind of charge on the hull and another would be concentrated in small space inside the spaceship also we could travel in magnetic field using this kind of principles. Geomagnetic field is very weak with comparison to the field which is used in superconductive magnets which have applications for instance in nuclear magnetic resonance diagnostic devices. But the fact that humanity can create so strong magnetic field and even stronger than this is promising in further experimenting with such a propulsion types. How strong the field should be to sustain proper support for the gyroscopes I don't know but if this would be tens of kilograms or hundreds of thrust available for support the central axis then when the gyroscopes would be spinning very fast the system would be undertake the work and the relations between trust created by magnetic field and pro-gravity created by gyroscopes would be engaged. The good idea would be use Tesla's coil for creating strong electric field which should be deliver on the hull, so magnetic field from the planet or galaxy would be interacting with this electric high intense field. So the polarization of the hull would be resulting with the tendency to move the spaceship perpendicularly to the lines of external geomagnetic field and this could mean that this would be an electromagnetic gravity propulsion capable of space travel. 


 Second case with autonomous propulsion without using geomagnetic field.






środa, 4 czerwca 2025

Nitinol

Nitinol is a titanium-nickel alloy presenting shape memory by use of heating and cooling and it can return to programmed shape after warming up. While nitinol can change its geometric shape in time by use only changes in temperature it is exposed it can be helpful in my conceptions. It has also application in robotics for making parts which are used as artificial muscles capable to move robot arms and so on. Nitinol could be used as a spring and after it is warmed up will attract a wheeled or magnetically levitated chassis to inclined to one direction ramps. After this process the chassis will be replaced into the end of this ramp and than another nitinol element would be working on another side of the ramp inclined in opposite angle, so imagine that we would have a system of ramps creating one line - track on which the train would be moving. Nitinol can be warm up to change geometry many times without visible wearing of the material, however frankly saying I don't know how many times the cycles of heating and cooling it can stand. But application of nitinol or other even better materials could make better my solutions presented here on a couple of pictures. First of all, I wouldn't need to use thermal expansion of common metal what as we know would give very small increase of length on propulsion rods, but with application of materials with memory of shape the problem would be less complicated. Instead of magnets - electromagnets I can also use nitinol. Nitinol can create a pressure on upper or lower ramp, by changing its own geometric shape, so the vehicle can be propelled by use of geometric inclination because the entire system will be tending to obtain lowest possible internal energy level. Adding axial vibration generators to the propulsion system and electromagnetic starter we can obtain almost autonomous and energy independent system in which only needed energy is small quantity of electromagnetic energy required for controling and accelerating the train. Once electromagnetic energy is delivered, the system will undertake the work automatically.









Inertia centrifugal propulsion attempt.

Today I present a type of drive that uses inertial forces and centrifugal forces. The idea is not new and from time to time you can come acr...