A wobbling propulsion.

A wobbling propulsion.

This wobbling propulsion is my new and a little different from everything I posted lately concept and attempt to generate a propulsion forces using a centrally placed cone and wobbling magnetic ring (pic. 3) The wobble can be obtained by application of a specific clump gear solution or externally by using an air stream from air pump. Some kind of rotary magnetic field inside the ring is also possible but this solution is too much complicated. 

The other kind of this situation simultaneously much simpler is on the picture 1 there is shown that the ring being under influence of the unbalanced centrifugal force is resisting to surrender gravity force. It is because the ring has enough inertial energy to resist those gravity forces. It is wobble around the central rigid rod and that process don't allow to fall the ring down. This is not because of the friction - if there were no friction this process as it is in previous case will be of the same appearance. Now if to put together such a three systems as is shown on picture 2 than the centrifugal forces become balanced but this is only when the particular systems will be of the same phase in time. If the phases are joined the entire system will be working with no result vibrations. 

Pic. 1 - system is resisting gravity as long as wobbling is present.

Pic. 2 - system is balanced according to side reaction forces, system has active forces.

Pic. 2 a - no result forces - system is balanced

Pic.3

Pic. 4 - Spacecraft with wobble propulsion system

Pic. 5 - up view.

This all without proper experiments seems to remain only wish of how it could work but this is not tested yet, so this method should be calculated and tested in the environment which will be eliminate the opportunity to obtaining the false data.